South Carolina Well Data › Kershaw County › Elgin (29045)
Elgin, SC (29045): well depth, water level & drilling cost
✓ 86 SCDES + USGS records · Kershaw County
Pull every recorded well near a Elgin (29045) address — $49
How deep are wells in and around Elgin (29045), South Carolina?
The median drilled well depth in and around Elgin (29045) is 154 ft, based on 86 wells with recorded depths in the state SCDES + USGS database. Half fall between 99 ft and 190 ft; 90% are shallower than 233 ft.
How much does it cost to drill a well in and around Elgin (29045)?
Applying published per-foot rates to the local median depth of 154 ft: drilling and casing alone typically runs $3,850–$10,010; a complete system including pump, pressure tank, and hookup typically runs $9,240–$15,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Elgin (29045)?
The median static water level is 70 ft below ground surface (middle half of wells: 48 ft–100 ft), from 62 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kershaw County.
Part of Kershaw County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.