South Carolina Well Data › Kershaw County
Kershaw County, South Carolina: well depth, water level & drilling cost
✓ 379 SCDES + USGS records · verified 2026-10-12
Pull every recorded well near a Kershaw County address — $49
How deep are wells in Kershaw County, South Carolina?
The median drilled well depth in Kershaw County is 152 ft, based on 370 wells with recorded depths in the state SCDES + USGS database. Half of all wells fall between 100 ft and 225 ft; 90% are shallower than 326 ft. Wells drilled since 2016 have a median depth of 308 ft.
How much does it cost to drill a well in Kershaw County?
Applying published per-foot rates to the local median depth of 152 ft: drilling and casing alone typically runs $3,800–$9,880; a complete system including pump, pressure tank, and hookup typically runs $9,120–$15,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Kershaw County?
The median static water level is 40 ft below ground surface (middle half of wells: 25 ft–65 ft), from 246 measurements.
How much water do wells in Kershaw County produce?
The median tested yield is 40 gpm (middle half: 15 gpm–120 gpm), from 274 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Kershaw County?
| Driller | Wells since 2016 |
|---|---|
| Professional Pump & Well | 2 |
| AAA Well Drilling | 2 |
See every driller with wells on record in Kershaw County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kershaw County.
Well records by ZIP code in Kershaw County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Elgin (29045) — 86 wells, median 154 ft
- Rembert (29128) — 75 wells, median 165 ft
- Lugoff (29078) — 66 wells, median 205 ft
- Bethune (29009) — 66 wells, median 157 ft
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.