South Carolina Well Data › Barnwell County › Barnwell (29812)
Barnwell, SC (29812): well depth, water level & drilling cost
✓ 311 SCDES + USGS records · Barnwell County
Pull every recorded well near a Barnwell (29812) address — $49
How deep are wells in and around Barnwell (29812), South Carolina?
The median drilled well depth in and around Barnwell (29812) is 96 ft, based on 311 wells with recorded depths in the state SCDES + USGS database. Half fall between 55 ft and 265 ft; 90% are shallower than 401 ft.
How much does it cost to drill a well in and around Barnwell (29812)?
Applying published per-foot rates to the local median depth of 96 ft: drilling and casing alone typically runs $2,400–$6,240; a complete system including pump, pressure tank, and hookup typically runs $5,760–$9,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Barnwell (29812)?
The median static water level is 37 ft below ground surface (middle half of wells: 28 ft–46 ft), from 145 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Barnwell County.
Part of Barnwell County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.