South Carolina Well Data › Aiken County › New Ellenton (29809)
New Ellenton, SC (29809): well depth, water level & drilling cost
✓ 618 SCDES + USGS records · Aiken County
Pull every recorded well near a New Ellenton (29809) address — $49
How deep are wells in and around New Ellenton (29809), South Carolina?
The median drilled well depth in and around New Ellenton (29809) is 80 ft, based on 618 wells with recorded depths in the state SCDES + USGS database. Half fall between 46 ft and 210 ft; 90% are shallower than 460 ft.
How much does it cost to drill a well in and around New Ellenton (29809)?
Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around New Ellenton (29809)?
The median static water level is 67 ft below ground surface (middle half of wells: 38 ft–107 ft), from 194 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Aiken County.
Part of Aiken County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.