South Carolina Well Data › Horry County › Myrtle Beach (29572)
Myrtle Beach, SC (29572): well depth, water level & drilling cost
✓ 81 SCDES + USGS records · Horry County
Pull every recorded well near a Myrtle Beach (29572) address — $49
How deep are wells in and around Myrtle Beach (29572), South Carolina?
The median drilled well depth in and around Myrtle Beach (29572) is 504 ft, based on 81 wells with recorded depths in the state SCDES + USGS database. Half fall between 94 ft and 654 ft; 90% are shallower than 780 ft.
How much does it cost to drill a well in and around Myrtle Beach (29572)?
Applying published per-foot rates to the local median depth of 504 ft: drilling and casing alone typically runs $12,600–$32,760; a complete system including pump, pressure tank, and hookup typically runs $30,240–$50,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Myrtle Beach (29572)?
The median static water level is 68 ft below ground surface (middle half of wells: 26 ft–91 ft), from 41 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Horry County.
Part of Horry County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.