South Carolina Well Data › Florence County › Lake City (29560)
Lake City, SC (29560): well depth, water level & drilling cost
✓ 60 SCDES + USGS records · Florence County
Pull every recorded well near a Lake City (29560) address — $49
How deep are wells in and around Lake City (29560), South Carolina?
The median drilled well depth in and around Lake City (29560) is 395 ft, based on 60 wells with recorded depths in the state SCDES + USGS database. Half fall between 282 ft and 583 ft; 90% are shallower than 617 ft.
How much does it cost to drill a well in and around Lake City (29560)?
Applying published per-foot rates to the local median depth of 395 ft: drilling and casing alone typically runs $9,875–$25,675; a complete system including pump, pressure tank, and hookup typically runs $23,700–$39,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Lake City (29560)?
The median static water level is 53 ft below ground surface (middle half of wells: 31 ft–62 ft), from 35 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Florence County.
Part of Florence County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.