South Carolina Well Data › Darlington County › Hartsville (29550)
Hartsville, SC (29550): well depth, water level & drilling cost
✓ 84 SCDES + USGS records · Darlington County
Pull every recorded well near a Hartsville (29550) address — $49
How deep are wells in and around Hartsville (29550), South Carolina?
The median drilled well depth in and around Hartsville (29550) is 195 ft, based on 83 wells with recorded depths in the state SCDES + USGS database. Half fall between 155 ft and 380 ft; 90% are shallower than 423 ft.
How much does it cost to drill a well in and around Hartsville (29550)?
Applying published per-foot rates to the local median depth of 195 ft: drilling and casing alone typically runs $4,875–$12,675; a complete system including pump, pressure tank, and hookup typically runs $11,700–$19,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Hartsville (29550)?
The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–46 ft), from 36 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Darlington County.
Part of Darlington County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.