South Carolina Well Data › Chesterfield County › Cheraw (29520)
Cheraw, SC (29520): well depth, water level & drilling cost
✓ 75 SCDES + USGS records · Chesterfield County
Pull every recorded well near a Cheraw (29520) address — $49
How deep are wells in and around Cheraw (29520), South Carolina?
The median drilled well depth in and around Cheraw (29520) is 85 ft, based on 73 wells with recorded depths in the state SCDES + USGS database. Half fall between 48 ft and 135 ft; 90% are shallower than 168 ft.
How much does it cost to drill a well in and around Cheraw (29520)?
Applying published per-foot rates to the local median depth of 85 ft: drilling and casing alone typically runs $2,125–$5,525; a complete system including pump, pressure tank, and hookup typically runs $5,100–$8,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Cheraw (29520)?
The median static water level is 26 ft below ground surface (middle half of wells: 16 ft–50 ft), from 36 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Chesterfield County.
Part of Chesterfield County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.