South Carolina Well Data › Berkeley County › Summerville (29483)
Summerville, SC (29483): well depth, water level & drilling cost
✓ 60 SCDES + USGS records · Berkeley County
Pull every recorded well near a Summerville (29483) address — $49
How deep are wells in and around Summerville (29483), South Carolina?
The median drilled well depth in and around Summerville (29483) is 355 ft, based on 60 wells with recorded depths in the state SCDES + USGS database. Half fall between 300 ft and 421 ft; 90% are shallower than 548 ft.
How much does it cost to drill a well in and around Summerville (29483)?
Applying published per-foot rates to the local median depth of 355 ft: drilling and casing alone typically runs $8,875–$23,075; a complete system including pump, pressure tank, and hookup typically runs $21,300–$35,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Summerville (29483)?
The median static water level is 35 ft below ground surface (middle half of wells: 26 ft–60 ft), from 39 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Berkeley County.
Part of Berkeley County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.