South Carolina Well Data › Georgetown County › Georgetown (29440)
Georgetown, SC (29440): well depth, water level & drilling cost
✓ 85 SCDES + USGS records · Georgetown County
Pull every recorded well near a Georgetown (29440) address — $49
How deep are wells in and around Georgetown (29440), South Carolina?
The median drilled well depth in and around Georgetown (29440) is 686 ft, based on 85 wells with recorded depths in the state SCDES + USGS database. Half fall between 440 ft and 804 ft; 90% are shallower than 852 ft.
How much does it cost to drill a well in and around Georgetown (29440)?
Applying published per-foot rates to the local median depth of 686 ft: drilling and casing alone typically runs $17,150–$44,590; a complete system including pump, pressure tank, and hookup typically runs $41,160–$68,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Georgetown (29440)?
The median static water level is 61 ft below ground surface (middle half of wells: 19 ft–94 ft), from 36 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Georgetown County.
Part of Georgetown County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.