South Carolina Well Data › Lexington County › Columbia (29212)
Columbia, SC (29212): well depth, water level & drilling cost
✓ 160 SCDES + USGS records · Lexington County
Pull every recorded well near a Columbia (29212) address — $49
How deep are wells in and around Columbia (29212), South Carolina?
The median drilled well depth in and around Columbia (29212) is 165 ft, based on 160 wells with recorded depths in the state SCDES + USGS database. Half fall between 118 ft and 245 ft; 90% are shallower than 305 ft.
How much does it cost to drill a well in and around Columbia (29212)?
Applying published per-foot rates to the local median depth of 165 ft: drilling and casing alone typically runs $4,125–$10,725; a complete system including pump, pressure tank, and hookup typically runs $9,900–$16,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Columbia (29212)?
The median static water level is 38 ft below ground surface (middle half of wells: 30 ft–48 ft), from 13 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lexington County.
Part of Lexington County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.