South Carolina Well Data › Lexington County › West Columbia (29170)
West Columbia, SC (29170): well depth, water level & drilling cost
✓ 128 SCDES + USGS records · Lexington County
Pull every recorded well near a West Columbia (29170) address — $49
How deep are wells in and around West Columbia (29170), South Carolina?
The median drilled well depth in and around West Columbia (29170) is 86 ft, based on 128 wells with recorded depths in the state SCDES + USGS database. Half fall between 60 ft and 293 ft; 90% are shallower than 402 ft.
How much does it cost to drill a well in and around West Columbia (29170)?
Applying published per-foot rates to the local median depth of 86 ft: drilling and casing alone typically runs $2,150–$5,590; a complete system including pump, pressure tank, and hookup typically runs $5,160–$8,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around West Columbia (29170)?
The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–44 ft), from 98 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lexington County.
Part of Lexington County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.