South Carolina Well Data › Lee County › Elliott (29046)
Elliott, SC (29046): well depth, water level & drilling cost
✓ 56 SCDES + USGS records · Lee County
Pull every recorded well near a Elliott (29046) address — $49
How deep are wells in and around Elliott (29046), South Carolina?
The median drilled well depth in and around Elliott (29046) is 335 ft, based on 55 wells with recorded depths in the state SCDES + USGS database. Half fall between 217 ft and 449 ft; 90% are shallower than 532 ft.
How much does it cost to drill a well in and around Elliott (29046)?
Applying published per-foot rates to the local median depth of 335 ft: drilling and casing alone typically runs $8,375–$21,775; a complete system including pump, pressure tank, and hookup typically runs $20,100–$33,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Elliott (29046)?
The median static water level is 15 ft below ground surface (middle half of wells: 8 ft–19 ft), from 43 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lee County.
Part of Lee County well records.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.