⟁ South Carolina Well Data field records · 2026 survey

South Carolina Well Data › Jasper County

Jasper County, South Carolina: well depth, water level & drilling cost

✓ 460 SCDES + USGS records · verified 2026-10-12

186 ftmedian well depth
140 ft–240 fttypical depth range
42 ftmedian static water level
100 gpmmedian yield (175 tests)

Pull every recorded well near a Jasper County address — $49

How deep are wells in Jasper County, South Carolina?

The median drilled well depth in Jasper County is 186 ft, based on 459 wells with recorded depths in the state SCDES + USGS database. Half of all wells fall between 140 ft and 240 ft; 90% are shallower than 301 ft. Wells drilled since 2016 have a median depth of 550 ft.

How much does it cost to drill a well in Jasper County?

Applying published per-foot rates to the local median depth of 186 ft: drilling and casing alone typically runs $4,650–$12,090; a complete system including pump, pressure tank, and hookup typically runs $11,160–$18,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Jasper County?

The median static water level is 42 ft below ground surface (middle half of wells: 23 ft–55 ft), from 256 measurements.

How much water do wells in Jasper County produce?

The median tested yield is 100 gpm (middle half: 40 gpm–300 gpm), from 175 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 38 50–100 ft 26 100–150 ft 65 150–200 ft 122 200–300 ft 156 300–400 ft 17 400–600 ft 25 600+ ft 10
Looking at a specific property in Jasper County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Jasper County

Free. Goes to licensed drillers working Jasper County.

Well records by ZIP code in Jasper County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.