South Carolina Well Data › Bamberg County
Bamberg County, South Carolina: well depth, water level & drilling cost
✓ 156 SCDES + USGS records · verified 2026-10-12
Pull every recorded well near a Bamberg County address — $49
How deep are wells in Bamberg County, South Carolina?
The median drilled well depth in Bamberg County is 265 ft, based on 153 wells with recorded depths in the state SCDES + USGS database. Half of all wells fall between 172 ft and 397 ft; 90% are shallower than 699 ft. Wells drilled since 2016 have a median depth of 740 ft.
How much does it cost to drill a well in Bamberg County?
Applying published per-foot rates to the local median depth of 265 ft: drilling and casing alone typically runs $6,625–$17,225; a complete system including pump, pressure tank, and hookup typically runs $15,900–$26,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Bamberg County?
The median static water level is 22 ft below ground surface (middle half of wells: 14 ft–35 ft), from 78 measurements.
How much water do wells in Bamberg County produce?
The median tested yield is 200 gpm (middle half: 75 gpm–491 gpm), from 86 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Bamberg County?
| Driller | Wells since 2016 |
|---|---|
| AAA Well Drilling | 2 |
| Allen | 2 |
See every driller with wells on record in Bamberg County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bamberg County.
Method: medians computed from SCDES + USGS records (USGS NWIS groundwater inventory, water-supply wells only (monitoring wells, test holes and injection wells excluded), and only wells carrying a measured depth). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.